[j-nsp] SRX & MPLS

[GIULIANO (WZTECH)]

Phill,

Could ou please share some juniper links or configurations on how about 
to configure SRX boxes with MPLS in a RING topology ?

Are you using L3 MPLS VPN or L2 VPLS or EoMPLS ?

Is it possible to share some configurations or links ?

Thanks a lot,

Giuliano


> On 15/08/12 15:29, Johan Borch wrote:
>> Hi,
>>
>> I have a design question regarding MPLS.
>>
>> I'm planning to create a MPLS rings with 4-8 SRX240 devices in packet
>> mode
>> and the main purpose is L3VPN/VPLS
>>
>> p1-p2-p3-p4-p5-p1 (p5 connects back to p1)
>>
>> My budget is low for this and the srx240 is cheap, we will push max
>> 1Gbps.
>
> That should be ok. I've had hundreds of megabits of MPLS out of the SRX210.
>
>>
>> For example in some sites there will be two SRX and the plan is to use
>> these two as P/PE and use VRRP for customer equipment. At the same time
>> they will be P routers for other sites.
>>
>> Example site:
>>
>> P1--------P3-P4----------P5
>>               \  /
>>              (vrrp)
>>      Customer equipment
>>
>> Do I make any sense? Will this work? :)
>
> Should do. We use them in similar (but not identical) configurations.
>
> I've never tested VRRP on them, however.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp