[j-nsp] nssa default route

ryanL ryan.landry at gmail.com
Thu Aug 16 14:23:26 EDT 2012


i have tried the type-7 trick, to no avail.

On Thu, Aug 16, 2012 at 11:15 AM, Devin Kennedy
<devinkennedy415 at hotmail.com> wrote:
> Hi Ryan:
>
> Have you already tried adding the 'type-7' knob to the NSSA area?
>
> [edit]
> Devin at MX10-1# set protocols ospf area 1 nssa default-lsa ?
> Possible completions:
>   <[Enter]>            Execute this command
> + apply-groups         Groups from which to inherit configuration data
> + apply-groups-except  Don't inherit configuration data from these groups
>   default-metric       Metric for the default route in this area
> (1..16777215)
>   metric-type          External metric type for the default type 7 LSA
> (1..2)
>   type-7               Flood type 7 default LSA if no-summaries is
> configured <<<<<<<<<<<<<<<<<< This knob
>   |                    Pipe through a command
>
> Since you are configuring 'no-summaries' and the default route comes through
> as such I believe you need to allow it as a type-7 instead.
>


More information about the juniper-nsp mailing list