[j-nsp] EX4200 Virtual chassis ??

Patrick Dickey dickeypjeep at yahoo.com
Wed Aug 22 14:30:13 EDT 2012


I'd strongly suggest using virtual chassis (as long as your somewhat current
on your Junos version). Virtual Chassis is now a mature technology, and it's
much easier to administer than the STP route, (faster, better, stronger....)


Patrick

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Rachid DHOU
Sent: Wednesday, August 22, 2012 11:48 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] EX4200 Virtual chassis ??

Dear experts,

We have two EX4200 switches, mainly used for L2 functionalities.
We want to add two new EX4200 Switches and we want to connect them with the
old switches.

i have two possibilities :

* Either, interconnect them and control everything with STP.
* or use Virtual chassis.


Please advise, what is the best way ? did you try Virtual chassis in EX ?
Do you have other options ?


*Kind regards,*
*Rachid DHOU*
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list