[j-nsp] About Juniper Control Plan Policy (CoPP)

Doug Hanks dhanks at juniper.net
Thu Aug 23 02:02:14 EDT 2012


This should walk you through most of your questions:

http://www.juniper.net/us/en/community/junos/training-certification/day-one
/fundamentals-series/securing-routing-engine/

Doug





On 8/22/12 8:35 PM, "Md. Jahangir Hossain" <jrjahangir at yahoo.com> wrote:

>Dear all friend:
>
>Wishes all are fine.
>
>I quit new in juniper OS platform . i need some information about juniper
>Control Plan Policy (CoPP). i read  the RFC 6192 of  Protect Router
>Control Plane which is:
>
>
>http://tools.ietf.org/html/rfc6192#appendix-A.2
>
>
>
>After reading the RFC 6192 i have a  little query as like,In cisco router
>we put input policy on control plan.
>
>as like;
>
>control-plane service-policy input COPPBut in Juniper router we put input
>policy into loopback interface according to this RFC .
>
>Here this is:
>
>interfaces { lo0 { unit 0 { family inet { filter input
>protect-router-control-plane; }Based on my question is, how
>juniper router loopback interface control all router control plan ? or i
>need to put this input filter policy individually on different
>interfaces as like:
>
>
>interfaces{ em0 { unit 0 { family inet { filter input
>protect-router-control-plane; }
>
>interfaces { em1 { unit 0 { family inet { filter input
>protect-router-control-plane; }
>it would be nice for me can anyone please confirm me about this
>configuration .
>
>
>
>
>
>
>
>
>Thanks
>Jahangir Hossain
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp




More information about the juniper-nsp mailing list