[j-nsp] Config help with an SRX110 & ADSL

[Stefan Fouant]

Also, your DHCP propagate setting is referencing fe-0/0/0.0 whereas is should be referencing vlan.0, vlan.1 and vlan.2. Per the docs, the propagate option applies to the logical interface which will receive TCP/IP settings from the external network for propagation to the DHCP pool running on the device.  Currently, fe-0/0/0.0 isn't a routing interface and it isn't part of any assigned zone.

HTHs.

Stefan Fouant
JNCIE-SEC, JNCIE-SP, JNCIE-ENT, JNCI
Technical Trainer, Juniper Networks

Follow us on Twitter @JuniperEducate

Sent from my iPad

On Aug 28, 2012, at 7:41 AM, Dale Shaw <dale.shaw+j-nsp at gmail.com> wrote:

> [Apologies for top post]
> 
> There are a few problems with the config (once you get basic comms up
> you'll need to look at your IPsec settings) but I suspect the main problem
> is that interface at-1/0/0.0 isn't assigned to a security zone (untrust).
> 
> Cheers,
> Dale
> 
> On Aug 28, 2012 8:10 PM, "Josh Farrelly" <josh at base-2.co.nz> wrote:
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp