[j-nsp] Transporting VLAN between two 10GE ports on MX80

[Tomasz Mikołajek]

Hello.
This may help you:
http://www.juniper.net/techpubs/software/junos/junos91/mx-solutions-guide/configuring-basic-mx-series-layer-2-features.html

2012/8/29 Robert Hass <robhass at gmail.com>

> Hi
>
> I need to transport VLAN (switch / bridge) from port xe-0/0/1 (unit
> 200) to port xe-0/0/2 (unit 200) on MX80.
> It it possible ? If yes can anyone paste configuration for this task.
> Can I enable QinQ for this VLAN also ?
>
> BTW. I'm running 10.4S10
>
> Rob
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>