[j-nsp] SRX, UDP traffic, routing asymmetry

Phil Mayers p.mayers at imperial.ac.uk
Thu Dec 6 08:15:32 EST 2012


On 06/12/12 10:58, Per Westerlund wrote:
> To follow up my own post (even more to follow), here is the config you use
> on a J-series router to put it in router-mode. Nothing magic, just some
> configuration. This will work with SRX as well, there is nothing J-series
> specific in here. This config is found in
> /etc/config/jsr-series-routermode-factory.conf, and the box I picked it from
> was running Junos 10.2R4.8

Is this *actually* in router mode, or is it just in a permit-all flow mode?

In particularly, you seem to be missing a "packet-mode" statement for 
IPv4 or MPLS (which also disables flow mode for IPv4)

What does "show security flow status" say?


More information about the juniper-nsp mailing list