[j-nsp] switch idea.?

[Darius Seroka]

I played with MVRP in a lab scenario and it seemed very nice, so good for
juniper to have something similar. But have'nt had the opportunity to go
further with it as the production network I work with is not a uniform
juniper network.

Darius

On Fri, Dec 7, 2012 at 10:21 PM, Chuck Anderson <cra at wpi.edu> wrote:

> On Thu, Dec 06, 2012 at 09:00:40AM -0800, Michael Loftis wrote:
> > On Thu, Dec 6, 2012 at 8:35 AM, Mike Devlin <juniper at meeksnet.ca> wrote:
> >
> > > Its ironic this thread has started, since my company is in the process
> of
> > > replacing the core infrastructure, and we have it narrowed down to HP
> IRF
> > > on 5900 and 5800 platform vs Juniper EX4550 and EX4200 VChassis.
> > >
> > > I was considering asking the list about any experiences they have had
> > > comparing the 2 platforms.
> > >
> >
> > The biggest thing I miss over Cisco is VTP.  Managing VLAN's is a huge
> pain
> > without it when you've got dozens of switches that all need the same VLAN
> > config. The pros on both HP and Juniper though tend to outweigh Cisco
>
> How does MVRP compare to VTP?
>
>
> http://www.juniper.net/techpubs/en_US/junos11.4/topics/concept/bridging-mvrp-ex-series.html
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>