[j-nsp] Multicast - interop with Cisco

[Peder Bach]

Thanks! It works :-)


Should this also work in the vrf?


Global:

peder at ar100.nn# run show pim rps
 Instance: PIM.master

address-family INET
 RP address      Type        Mode   Holdtime Timeout Groups Group prefixes
 10.224.0.255    auto-rp     sparse      181     175      1 224.0.0.0/4


peder at ar100.nn> show pim rps instance iptv
Instance: PIM.bynett

address-family INET

address-family INET6

We should get another RP.


[edit routing-instances iptv]
 peder at ar100.nn# show
 instance-type vrf;
 interface ge-0/0/0.0;
 interface lo0.1;
 route-distinguisher 65339:50;
 provider-tunnel {
     pim-asm {
         group-address 239.1.1.1;
     }
 }
 vrf-target target:65339:50;
 vrf-table-label;
 protocols {
     pim {
         dense-groups {
             224.0.1.39/32;
             224.0.1.40/32;
         }
         vpn-tunnel-source 10.224.0.96;
         vpn-group-address 239.1.1.1;
         rp {
             auto-rp discovery;
             }
         }
         interface lo0.1 {
             mode sparse-dense;
         }
         interface ge-0/0/0.0 {
             mode sparse-dense;
         }
     }
 }


> Add this to your config:
>
> [edit protocols pim]
> user at host# set dense-groups 224.0.1.39/32
> user at host# set dense-groups 224.0.1.40/32
>
> Further info can be found here:
> http://www.juniper.net/techpubs/en_US/junos12.2/topics/topic-map/mcast-pim-auto-rp.html
>