[j-nsp] J-Flow Configuration on MX5

[Samol]

NTP is also enabled. What collector are you using? Is it possible that you
post the whole command you have done, some guys recommend to use firewall
filter to match the traffic, However, i haven't done that yet.

Cheer
Samol


2012/12/11 Bikram Singh <sbikram at live.com>

> have you enabled NTP ? because this is the requirement for jflow v5 to
> work in junos.
>
> -B
> > From: molasian at gmail.com
> > Date: Tue, 11 Dec 2012 15:20:26 +0700
> > To: ns.hando at gmail.com
> > CC: juniper-nsp at puck.nether.net
> > Subject: Re: [j-nsp] J-Flow Configuration on MX5
> >
> > Hi Nikita,
> >
> > *I believe this is RE based. below is configuration:*
> > *
>
> > *
> > Router> show configuration forwarding-options
> > sampling {
> > input {
> > rate 100;
> > }
> > family inet {
> > output {
> > flow-server 10.10.10.100 {
> > port 9000;
> > autonomous-system-type origin;
> > version 5;
> > }
> > }
> > }
> >
> >
> > Router> show configuration interfaces ge-1/1/1.24
> > vlan-id 24;
> > family inet {
> > sampling {
> > input;
> >
> > It's MX5-T and we use NFSEN as flow collector.
> >
> > Thanks
> > Sam
> >
> > 2012/12/11 Nikita Shirokov <ns.hando at gmail.com>
> >
> > > what kind of j-flow (re bassed or inline-jflow) are you trying to
> > > configure ? could you share the configuration? we have RE-bassed on our
> > > mx80 configured w/o any issues, and inline on 960s
> > > typical configuration for re based will be something like:
> > > input {
> > > rate 2000;
> > > run-length 0;
> > > max-packets-per-second 10000;
> > > }
> > > family inet {
> > > output {
> > > flow-inactive-timeout 60;
> > > flow-active-timeout 60;
> > > flow-server x.x.x.x {
> > > port 5000;
> > > source-address y.y.y.y;
> > > version 5;
> > > }
> > > }
> > > }
> > >
> > >
> > >
> > >
> > > 2012/12/11 Samol <molasian at gmail.com>
> > >
> > >> Has Anyone had experiences in configuring J-Flow on MX5 and it works?
> I
> > >> have been trying to find the documents, most of them are for SRX and J
> > >> series and not for MX series. I think the configuration would be the
> same
> > >> ,
> > >> but somehow it's not working for me. Any link, idea ,advice all would
> be
> > >> very appreciated.
> > >>
> > >> Cheers,
> > >> Samol
> > >> _______________________________________________
> > >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> > >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >>
> > >
> > >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>