[j-nsp] NAT on MX5?

[Luca Salvatore]

Yeah I know that... but its not even showing up in the config...

Luca

From: ashish verma [mailto:ashish.scit at gmail.com]
Sent: Friday, 14 December 2012 4:35 PM
To: Luca Salvatore
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] NAT on MX5?

You can only do 1:1 NAT. One to many is not supported until the new service mic is ready.

On Fri, Dec 14, 2012 at 4:25 PM, Luca Salvatore <Luca at ninefold.com<mailto:Luca at ninefold.com>> wrote:
Ermm....  Feel weird asking this but can I do NAT on a MX5?
It doesn't seem have the features:


# set services ?
Possible completions:
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
> rpm                  Real-time performance monitoring

Where's my NAT?
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net<mailto:juniper-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp