[j-nsp] Juniper Shaping TC, Odd Spirent Results

[Matt Bentley]

Thanks very much.  I'd love to find that out.  However, not able to find
the commands you reference.  Is there a different set for 10.4R code?


SSBR0(m10i-1 vty)# show cos ifl-entry 101
Cos-ifl entry for ifl ge-0/1/3.31 (101)
==================================
Ifl-index                  : 101
Ifd-index                  : 0
cos flags                  : 0x0
Class-slot                 : 0x8
Class-slot table           : 0x0
rw_flags[0]                : 0x0
rw_flags[1]                : 0x0
rw_flags[2]                : 0x0
rw_table_id                : 0
queue_num                  : 0
shaper_info                : 180000000
classifiers[      unknown] : 0
classifiers[         DSCP] : 0
classifiers[          EXP] : 0
classifiers[   IEEE 802.1] : 0
classifiers[IP precedence] : 0
classifiers[        Fixed] : 0
classifiers[EXP-SWAP-PUSH-2] : 0
classifiers[   EXP-PUSH-3] : 0
classifiers[    DSCP IPv6] : 0
classifiers[Frame-Relay DE] : 0
classifiers[IEEE 802.1 Untrust] : 0
classifiers[ IEEE 802.1ad] : 0
classifiers[    MPLS DSCP] : 0
classifiers[MPLS DSCP_IPv6] : 0
classifiers[   IEEE 802.1] : 0


SSBR0(m10i-1 vty)# show cos
    classifier            show the currently active classifiers
    drop-profile          show the currently active drop profiles
    fabric                show fabric qos settings
    global                shows the global cos state(qtable, copy plp,
tri-color)
    ifl-entry             show the cos-ifl-entry for an ifl
    ifl-ifd-table         show the ifd-table for the lsi or irb ifl
    intf-forwarding-class-table   show the currently active interface
specific forwarding class table
    management            show class of service management statistics
    r2cp                  show R2CP cos info
    rw-table              show the currently active rewriting tables
    scheduler-subunit     show the active scheduler subunits
    scheduling-policy     show the active scheduler maps

SSBR0(m10i-1 vty)# show q
    q2pic                 Q2TM based PIC information
    q2tm                  Show Q2.0 Traffic Manager (Q2TM) information
    q2tmh                 Dump q2tmh HSL register block
    qcds1-pic             Q-based Channelized DS1 pic information
    qchip                 qchip information
    qcoc12-pic            Q based Channelized OC-12 pic information
    qcoc3-pic             Q based Channelized STM1 pic information
    qcoc3-t1-pic          Q based Channelized OC-3 pic information
    qct3-pic              Q-based Channelized T3 pic information
    qge-pic               QGE PIC information





On Thu, Dec 20, 2012 at 2:18 PM, Saku Ytti <saku at ytti.fi> wrote:

> On (2012-12-20 14:03 -0700), Matt Bentley wrote:
>
> > least for a good while yet.  I'm opening the JTAC case to try to
> determine
> > what the default BC is that they don't let me configure on our existing
> > code.  Then at least I know what the limitations I'm forced to deal with
> > pending an upgrade are.
>
> It's going to be more than 200k.
>
> 'sh int foo' - take (Index #)
>
> start shell pfe network X
> show cos hal ifl index# (take L2 index)
> show qxchip 0 l2 l2index#
>
> You'll see 'cfg_burst_size'
> --
>   ++ytti
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>