[j-nsp] Juniper Shaping TC, Odd Spirent Results

[Matt Bentley]

Thanks.  So no way to check for the burst setting in the actual hardware on
the code I'm running?  I understand I might not be able to fix it, but if I
could find out the burst setting that's there, that would be tremendously
helpful.

On Thu, Dec 20, 2012 at 3:01 PM, Saku Ytti <saku at ytti.fi> wrote:

> On (2012-12-20 14:50 -0700), Matt Bentley wrote:
>
> > Thanks very much.  I'd love to find that out.  However, not able to find
> > the commands you reference.  Is there a different set for 10.4R code?
> >
> > SSBR0(m10i-1 vty)# show cos ifl-entry 101
> > Cos-ifl entry for ifl ge-0/1/3.31 (101)
>
> I'm talking strictly about Trio platforms. I think RLI also applies to Trio
> only not generic.
> I wouldn't be too hopeful of getting this fixed if I were you.
>
> --
>   ++ytti
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>