[j-nsp] Mounting MX80 at an angle

[Serge Vautour]

I don't mean angled side-side, I mean angles front-back. So the back end would be lower than the front end. After mounting, if you stood in front of the MX, the front plate would be pointing towards the ceiling a bit instead of horizontally.

Serge



________________________________
 From: Justin M. Streiner <streiner at cluebyfour.org>
To: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net> 
Sent: Thursday, February 16, 2012 1:22:34 PM
Subject: Re: [j-nsp] Mounting MX80 at an angle
 
On Thu, 16 Feb 2012, Serge Vautour wrote:

> Has anyone ever rack mounted an MX80 or a similar sized router at an angle before? Any reason why this isn't a good idea? Could it have an impact on the electrical components?

I'm not entirely sure what you mean by mounting at an angle.  Do you have any pictures/examples?

jms
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp