[j-nsp] Double-tagging on EX

ramesh.ngr at wipro.com ramesh.ngr at wipro.com
Wed Feb 22 07:59:15 EST 2012


Hi 
While thinking about how to do it, I was wondering what is the requirement of this? 
You have packets from two different VLAN untagged and going out through a tagged interface. But this tagged interface should be part of the two VLAN and this packets should be placed in the respective VLAN. 

How can the packet be tagged with two VLAN id? Wats the requirement?


Ramesh N.G

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Alexander Frolkin
Sent: Wednesday, February 22, 2012 5:50 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Double-tagging on EX

Hi,

We need to double-tag packets on an EX4200, i.e., untagged packets come in on one interface, and packets with two VLAN tags come out of another interface.  So far, everything we tried has failed.  Has anyone figured out how to do this?

Juniper documentation is useless, as always.


Thanks!


Alex

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com



More information about the juniper-nsp mailing list