[j-nsp] VPLS configuration

Per Granath per.granath at gcc.com.cy
Fri Jan 20 04:04:11 EST 2012


> > You have no CE interface in the chrismas instance.  Do you just want
> > the IRB interface in there? If so, than replace "interface irb.800" with
> "routing-interface irb.800"
> 

Note that whatever CE facing interfaces you have in the vpls type routing-instance, also need to have "encapsulation vlan-vpls" and "family vpls" configured on the IFL.

I have not seen that in your configs.

Now, it will be much easier to skip the irb interface, and configure VPLS on the XE (or AE) interface, and then transport your vlans in VPLS instead of in "bridge".



More information about the juniper-nsp mailing list