[j-nsp] Quick Question About HA Setup

[Mark Menzies]

Hiya bud

Yes that can work here.

Just make sure that the SRXs are less than 100ms apart and each sync
connection, both fabric and control, is on separate VLANs.

HTH



On 16 July 2012 10:04, Spam <spam-me at fioseurope.net> wrote:

> Is it possible to connect 2 SRX devices together into a HA Cluster by
> connecting
> the Control & Fabric Interlinks via switches or must they be directly
> connected.
>
> My planned setup is as follows:
>
> SRX<->Switch<->10GB Xconnect<->Switch<->SRX
>
> I can also give each connection is own dedicated VLAN if that would help.
>
> Spammy
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>