[j-nsp] Quick Question About HA Setup
Farid Bouzemarene
Farid.Bouzemarene at magirus.com
Mon Jul 16 06:18:14 EDT 2012
Also make sur you have jumbo frame for fab link and igmp snooping deactivated
----- Message d'origine -----
De : Mark Menzies [mark at deimark.net]
Envoyé : 16.07.2012 10:16 CET
À : spam-me at fioseurope.net
Cc : juniper-nsp at puck.nether.net
Objet : Re: [j-nsp] Quick Question About HA Setup
Hiya bud
Yes that can work here.
Just make sure that the SRXs are less than 100ms apart and each sync
connection, both fabric and control, is on separate VLANs.
HTH
On 16 July 2012 10:04, Spam <spam-me at fioseurope.net> wrote:
> Is it possible to connect 2 SRX devices together into a HA Cluster by
> connecting
> the Control & Fabric Interlinks via switches or must they be directly
> connected.
>
> My planned setup is as follows:
>
> SRX<->Switch<->10GB Xconnect<->Switch<->SRX
>
> I can also give each connection is own dedicated VLAN if that would help.
>
> Spammy
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list