[j-nsp] Quick Question About HA Setup

[Spam]

Thanks for the info guys. I know it is not a recommended solution, but I 
have
2 ISP links in 2 different locations, which are connected together via a 
single 10GB
vlan trunk between 2 switches, so I'm kinda stuck.

Spammy


-----Original Message-----

From: Clay Haynes <chaynes at centracomm.net>

To: "spam-me at fioseurope.net" <spam-me at fioseurope.net>, 
"juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>

Date: Mon, 16 Jul 2012 12:06:52 +0000

Subject: Re: [j-nsp] Quick Question About HA Setup




SRX Technical Note 21 will have the Design Considerations and Deployment

Scenarios you need. This link does require an account to login first.



http://kb.juniper.net/InfoCenter/index?page=content&id=TN21 
[http://kb.juniper.net/InfoCenter/index?page=content&id=TN21]







- Clay















On 7/16/12 5:04 AM, "Spam" <spam-me at fioseurope.net> wrote:



>Is it possible to connect 2 SRX devices together into a HA Cluster by

>connecting

>the Control & Fabric Interlinks via switches or must they be directly

>connected.

>

>My planned setup is as follows:

>

>SRX<->Switch<->10GB Xconnect<->Switch<->SRX

>

>I can also give each connection is own dedicated VLAN if that would help.

>

>Spammy

>

>

>_______________________________________________

>juniper-nsp mailing list juniper-nsp at puck.nether.net

>https://puck.nether.net/mailman/listinfo/juniper-nsp 
[https://puck.nether.net/mailman/listinfo/juniper-nsp]