[j-nsp] Fwd: mx480 to mx240 port channel ae

[Alex Arseniev]

What JUNOS version and linecard HW?
"interface-mode trunk" is supported on Trio starting from 11.1.
Thanks
Alex 

----- Original Message ----- 
From: "Mohammad Khalil" <eng.mssk at gmail.com>
To: <juniper-nsp at puck.nether.net>
Sent: Thursday, July 19, 2012 6:48 AM
Subject: [j-nsp] Fwd: mx480 to mx240 port channel ae


> ---------- Forwarded message ----------
> From: Mohammad Khalil <eng.mssk at gmail.com>
> Date: Wed, Jul 18, 2012 at 11:45 AM
> Subject: mx480 to mx240 port channel ae
> To: juniper-nsp at puck.nether.net
> 
> 
> Hi all , I have mx480 and mx240 routers
> I tried to connect them via ether channel (port aggregation) , but there
> was remarkable packet loss
> 
> CR04# show interfaces ae1
> flexible-vlan-tagging;
> mtu 1600;
> encapsulation flexible-ethernet-services;
> aggregated-ether-options {
>    lacp {
>        active;
>    }
> }
> unit 0 {
>    family bridge {
>        interface-mode trunk;
>    }
> }
> unit 10 {
>    vlan-id 10;
>    family inet {
>        address 10.0.0.17/30;
> 
> Any ideas ?
> 
> Thanks
> 
> BR,
> Mohammad
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>