[j-nsp] Logical Systems Interconnection by Physical Interface

[Per Westerlund]

Didn't you just forget to add VLAN tagging to the main interface?

/Per Westerlund

27 jul 2012 kl. 14:17 skrev Abdul 2012:

> Hello,
> 
> 
> 
> I have two logical systems configured on m7i router, I want to connect
> both LSs through two physical interfaces on the same router (fe-0/0/0
> and fe0/1/0): My configs on both interfaces like:
> 
> 
> 
> R1)
> 
> 
> 
> root at JNCIE-SP# run show configuration logical-systems R1
> interfaces {
>    fe-0/0/0 {
>        unit 1 {
>            vlan-id 111;
>            family inet {
>                address 10.0.5.1/24;
>            }
>        }
>    }
> 
> }
> 
> 
> 
> P1)
> 
> 
> 
> root at JNCIE-SP# run show configuration logical-systems P1
> interfaces {
>    fe-0/1/0 {
>        unit 1 {
>            vlan-id 111;
>            family inet {
>                address 10.0.5.254/24;
>            }
>        }
>    }
> 
> }
> 
> 
> 
> 
> 
> However, when I ping from R1 to P1 I got the following message "ping:
> sendto: Can't assign requested address"
> 
> 
> 
> What's the reason for that?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp