[j-nsp] IS-IS MT transition mode?

[Jared Gull]

Hi Michael,

You can enable an IPv6 unicast topology in addition to the default IPv4 and IPv6 topology for IS-IS using the 'topologies' keyword:

[edit]
user at router# set protocols isis topologies ?
Possible completions:
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
  ipv4-multicast       Enable IPv4-multicast topology
  ipv6-multicast       Enable IPv6-multicast topology
  ipv6-unicast         Enable IPv6-unicast topology

Hope this helps,

Jared



________________________________
 From: Michael Sinatra <michael at rancid.berkeley.edu>
To: juniper-nsp at puck.nether.net 
Sent: Monday, June 25, 2012 7:56 PM
Subject: [j-nsp] IS-IS MT transition mode?
 
Short question: Is there a JunOS equivalent of the IOS IS-IS command
'multi-topology transition'?

If not, are there suggestions for transitioning from single-topology
IPv4+IPv6 routing gradually, without creating IPv6 routing holes?

thanks,
michael
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp