[j-nsp] VPLS Between 2 Routers

Craig Whitmore lennon at orcon.net.nz
Thu Mar 1 21:36:56 EST 2012



On 2/03/12 2:14 PM, "Craig Whitmore" <lennon at orcon.net.nz> wrote:

>From:  David Ball <davidtball at gmail.com>
>Date:  Thu, 1 Mar 2012 17:55:30 -0700
>To:  Craig Whitmore <lennon at orcon.net.nz>
>Cc:  <juniper-nsp at puck.nether.net>
>Subject:  Re: [j-nsp] VPLS Between 2 Routers
>
>  Try adding the interface (ge-0/0/7.0) under the 'site' definition in the
>routing instance config.....it's required, as far as I know.  The rest
>looks
>pretty familiar.
>
>Tried that?
>
>No luck yet.. :-(

BTW.. I am NOT running RSVP between the 2 routers.. (but I do have LDP
enabled - as I had a l2circuit working to a cisco). Do I have to have RSVP
enabled for data to actually work and the BGP is just used for the setup ?
Thanks

>




More information about the juniper-nsp mailing list