[j-nsp] DSCP classifier on CCC interface

[Leigh Porter]

"Therefore, you do not have to depend on the underlying Layer 2 QoS support."

So it sounds as though is the layer 2 QoS field is there you can use that.

--
Leigh



> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Addy Mathur
> Sent: 20 March 2012 14:58
> To: Serge Vautour
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] DSCP classifier on CCC interface
> 
> Serge:
> 
> What platform/line-card are you trying this on?  This is possible in
> JUNOS
> 11.4 when using Trio/MPC line-cards on the MX.  See 11.4 release notes:
> 
> http://www.juniper.net/techpubs/en_US/junos11.4/information-
> products/topic-collections/release-notes/11.4/index.html?topic-
> 62949.html#jd0e3519
> 
> --Addy.
> 
> On Mon, Mar 19, 2012 at 2:27 PM, Serge Vautour
> <sergevautour at yahoo.ca>wrote:
> 
> > Hello,
> >
> > Would anyone know if it's possible to apply a DSCP classifier on a
> CCC
> > interface? Here's what I have:
> >
> >
> > Interface:
> >
> > ge-1/2/1 {
> >     encapsulation ethernet-ccc;
> >     unit 0;
> > }
> >
> > Routing-Instance:
> >
> > instance-type l2vpn;
> > interface ge-1/2/1.0;
> > vrf-target target:123:41;
> > protocols {
> >     l2vpn {
> >         encapsulation-type ethernet;
> >         no-control-word;
> >         site Site1 {
> >             site-identifier 1;
> >             interface ge-1/2/1.0;
> >         }
> >     }
> > }
> >
> > Class-of-Service interface:
> >
> > ge-1/2/1 {
> >     unit 0 {
> >         classifiers {
> >             dscp dscp-classifier;
> >         }
> >     }
> > }
> >
> >
> > Class-of-service classifier:
> >
> > dscp dscp-classifier {
> >     import default;
> >     forwarding-class expedited-forwarding {
> >         loss-priority low code-points [ 101000 101001 101010 101011
> > 101100
> > 101101 101110 101111 ];
> >     }
> > }
> >
> >
> > Note that the L2VPN is port based. Any valid ethernet frame will go
> > through.
> >
> >
> > To test this I generate a ping and set the ToS field to 101. The
> > classifier above should drive this to the EF class but it isn't.
> >
> >
> > I'm wondering if maybe you can't use a DSCP classifier on a non-IP
> > interface? Anybody tried this before? I thought I'd try this mailing
> > list before opening a case.
> >
> > Thanks,
> > Serge
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please visit http://www.symanteccloud.com
> ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________