[j-nsp] Rack mounting a EX4200-48PX, concerned about weight

[Patrick Dickey]

James-
I would suggest using the 4 post rack mounts for the EX4200. Juniper has
them on the price list. They do sag a little too much for my taste as
well, and with the bigger PSUs... yikes!
I've seen them after a year on a 2 post stock mount and they were fine
physically, though. 

HTH

Patrick



-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of James Baker
Sent: Tuesday, March 20, 2012 4:20 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight



I've got a couple of new EX4200-48PX with dual 930W power supply which
have just arrived and I'm quite concerned about the weight of the units in
relation to the rack ears. It is the same ears for the EX4200/3200 family.

Has anyone racked these before, if so how much sag do you get and do you
suggest a shelve underneath?

I've seen what a Cisco2811 does and how much it sags and this will be a
lot worse.

Thanks

James

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp