[j-nsp] MX BRAS and event-script for DHCP

[Terebizh, Evgeny]

Hi, 
This functionality is indeed highly desirable for ISP. 
AFAIK snmp traps might be used to signal a high  level of DHCP pool utilization on the BRAS.

Evgeny. 
________________________________________
From: juniper-nsp-bounces at puck.nether.net [juniper-nsp-bounces at puck.nether.net] on behalf of Bjørn Tore [bt at paulen.net]
Sent: Tuesday, March 20, 2012 5:27 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] MX BRAS and event-script for DHCP

All,

I am trying to wrap my head around SLAX and the ability to write some
values to the utility mib as an event script. Since I am running pre
11.x, the DHCP MIB is not implemented. What I want to do is to put the
values from

MX480> show network-access aaa statistics address-assignment pool
routing-instance MY-VRF MY-DHCP-POOL

into jnxUtilMib - so I can create pretty graphs.. Now - there is no rpc
equivalent to the command above:

MX480> show network-access aaa statistics address-assignment pool
routing-instance MY-VRF MY-DHCP-POOL | display xml rpc

<rpc-reply xmlns:junos="http://xml.juniper.net/junos/10.4S8/junos">
<message>
         xml rpc equivalent of this command is not available.
</message>
<cli>
<banner></banner>
</cli>
</rpc-reply>


Anyone did this already?

/BT
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp