[j-nsp] JunOS 10.4R8.5 on MX5? Am I forced to run 11.4+?

[Tima Maryin]

Hi,


Here:
http://www.juniper.net/techpubs/en_US/junos11.2/information-products/topic-collections/release-notes/11.2/topic-57399.html


"New MX5, MX10, and MX40 3D Universal Edge Routers—Three new routers 
based on the modular MX80 chassis are available in Junos OS Release 11.2R6."


Though in 11.4 relnotes it's 11.2R3 :-/
So you probably should try 11.2R6.




On 22.03.2012 11:16, Timh Bergström wrote:
> Hi,
>
> I recently bought a MX5-T (Instead of the MX80-5G) and I'm running
> 10.4R8.5 on my other MX80s and would naturally like to run the same
> codebase on all my MX-series hardware. However when I try to install
> the 10.4R8.5 release on the MX5-T it says that the platform is not
> supported, I thought the MX5/10/40 was the same hardware as the MX80
> (it surely looks the same, side-by-side)?
>
> Does anyone have any thoughts or information on this? It got delivered
> with 11.4R1.14 and I actually have no use of imix/etc whatever the new
> features is in the 11.X, I just want to run them as network edges with
> eBGP, iBGP and OSPF, no special stuff, and I'm happy with 10.4R8.5 so
> far.
>
> I also tried (for fun) to downgrade to 11.2R5.4 (which is the
> recommended release according to JTAC) but that didn't work either,
> the mgd process core-dumped and the validation failed, I did not run
> with "no-validate" (yet) for neither of the softwares.