[j-nsp] Destination NAT on SRX cluster

[Leigh Porter]

Yup it is a bug, it works fine in  11.4R1.6.

--
Leigh


> -----Original Message-----
> From: Ben Dale [mailto:bdale at comlinx.com.au]
> Sent: 20 March 2012 13:09
> To: Leigh Porter
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Destination NAT on SRX cluster
> 
> Hi Leigh,
> 
> On 20/03/2012, at 10:53 PM, Leigh Porter wrote:
> 
> >
> > error: The number of destination NAT pools exceeds limit of 0 [edit
> > security nat destination rule-set incoming-connections rule
> > port-forward then destination-nat]  'pool'
> >     failed to get pool (wilderness)
> > error: configuration check-out failed
> 
> It looks like a bug, but try changing the "from interface reth0.352" to
> "from zone <zone of interface reth0.352>" and see if the issue goes
> away.  Failing that, upgrade to 11.1R6 and see if that fixes it.
> 
> Ben
> 
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please visit http://www.symanteccloud.com
> ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________