[j-nsp] Cisco IGP fast convergence

[Doug Hanks]

Or just use BFD ...

Thank you,

-- 
Doug Hanks - JNCIE-ENT #213,  JNCIE-SP #875
Sr. Systems Engineer
Juniper Networks


On 5/29/12 4:54 AM, "Mark Tinka" <mark.tinka at seacom.mu> wrote:

>On Tuesday, May 29, 2012 12:19:19 PM Wan Tajuddin Wan Hussin
>wrote:
>
>> Has anyone deploy this type of setting and successfully
>> integrate with Juniper without any issue.
>
>You'll quickly notice that many configurable timers in Cisco
>are not available in Junos. However, this isn't a train-
>wreck, and they inter-op fairly well.
>
>Juniper spend more time adding fast convergence into the
>code without many options, while Cisco do the same but give
>you lots of knobs (good and bad thing).
>
>Just make sure you tune your timers appropriately for your
>network conditions, taking into account whether you
>designing for link or node failure.
>
>Mark.
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp