[j-nsp] Layer 2 circuit - Traffic not flowing between Cisco and Juniper with mismatched VLAN ID

[Mike Devlin]

troubleshooting is troubleshooting.  If this isnt working, making the
slight change on one end, is going to hurt anything, and may or may not
result in the resolution or the identification of a bug in the code line,
on either side of the equation.

There no point in negating the validity of the suggestion, without testing
it first in this exact scenario.  If that is your approach, then you have
never worked in a five 9's service provider before.  Complete disregard
because "it should work this" is not accepted.

On Thu, Nov 1, 2012 at 3:34 PM, <sthaug at nethelp.no> wrote:

> > i would still say, its worth the effort of swapping the vlan tags, and
> > seeing if the issue continues.  Wouldnt be the first Cisco <-> Juniper
> > "disagreement" and likely wont be the last.
>
> Well now - pseudowires between Cisco and Juniper routers have been
> working for years.
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>