[j-nsp] J2350 egress load balancing

[Mihai]

Maybe you're missing multipath option in your bgp config.


On 11/06/2012 09:00 PM, 叶雨飞 wrote:
> Hi,
>
> I have two uplink from same ISP  and I want to balance my egress on those,
> I've tried
>
> routing-options {
> forwarding-table {
>      export LOAD-BALANCE;
> }
> }
>
> policy-options{
> policy-statement LOAD-BALANCE {
>      then {
>          load-balance per-packet;
>      }
> }
> }
>
> but that doesn't seem to have a effect at all,
>
> Here's show route output, any ideas?
>
> 0.0.0.0/0          *[BGP/170] 2w3d 14:10:48, MED 0, localpref 100
>                        AS path: 6939 I
>                      >  to 65.19.176.77 via ge-0/0/3.999
>                      [BGP/170] 5d 09:09:32, MED 0, localpref 100
>                        AS path: 6939 I
>                      >  to 66.160.128.49 via ge-0/0/2.991
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp