[j-nsp] [SRX650] show pfe statistics weirdness
Nick Kritsky
nick.kritsky at gmail.com
Wed Nov 14 05:26:23 EST 2012
Hello,
There is something I don't understand.
There is a SRX650 running BFD for OSPF sessions. BFD is working, however I
wanted to make sure that it is processed in PFE.
All counters of "show pfe statistics traffic protocol bfd" are zero, but
BFD-related counters of "show pfe statistics traffic" are on-zero and
increasing. What might be the reason of such difference?
thanks
Nick
OS: 10.4R4.5
BFD is running on ge-0/0/1
Here is the output of "show pfe statistics traffic protocol bfd":
BFD protocol statistics:
Packets with invalid interface : 0
Packets with invalid address family : 0
Packets with bad IP checksum : 0
Packets with bad IP options : 0
Packets with bad IP length : 0
Packets with bad udp checksum : 0
Packets with bad udp length : 0
Packets with bad udp ports : 0
Packets with no logical interface : 0
Packets with prefix length mismatch : 0
Packets received : 0
Packets absorbed : 0
Packets failed to transmit : 0
Packets receive failures : 0
Packets allocation failures : 0
And here is the output of "show pfe statistics traffic":
Packet Forwarding Engine traffic statistics:
Input packets: 53237611735 5350 pps
Output packets: 80428514254 7630 pps
Packet Forwarding Engine local traffic statistics:
Local packets input : 38162325
Local packets output : 37968315
Software input control plane drops : 0
Software input high drops : 0
Software input medium drops : 1088
Software input low drops : 0
Software output drops : 0
Hardware input drops : 0
Packet Forwarding Engine local protocol statistics:
HDLC keepalives : 0
ATM OAM : 0
Frame Relay LMI : 0
PPP LCP/NCP : 0
OSPF hello : 1434683
OSPF3 hello : 0
RSVP hello : 0
LDP hello : 0
BFD : 26625331
IS-IS IIH : 0
LACP : 0
ARP : 7093341
ETHER OAM : 0
Unknown : 0
Packet Forwarding Engine hardware discard statistics:
Timeout : 0
Truncated key : 0
Bits to test : 0
Data error : 0
Stack underflow : 0
Stack overflow : 0
Normal discard : 20239282
Extended discard : 0
Invalid interface : 0
Info cell drops : 0
Fabric drops : 0
Packet Forwarding Engine Input IPv4 Header Checksum Error and Output MTU
Error statistics:
Input Checksum : 0
Output MTU : 0
More information about the juniper-nsp
mailing list