[j-nsp] vme input errors

[Darius Seroka]

Uriel,

I have also come across this last week but have not addressed it yet. Came
across these suggestions on the Juniper forums which I will try later as
the switches are offsite.

http://forums.juniper.net/t5/Ethernet-Switching/Inpur-errors-on-vme-interface/td-p/127021

Darius

On Thu, Nov 15, 2012 at 11:16 AM, Uriel Segal <URIEL at bynet.co.il> wrote:

> Hey,
>
> In the EX4200 Virtual-chassis, both me0 interfaces are up and running
> without any 'Input errors' on them.
> Though, the common vme interface is counting 'Input errors' all the time.
>
> Both me0 are connected to a single OOB OAM switch, which is also a
> virtual-chassis of 5xEX4200, each interface on a different member
>
> Both cables were check/replaced-anyway but it didn't help
>
>
> Any idea why vme is counting those errors?
>
>
> 10x,
> Uriel
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
-- 
Regards,
Darius Jan Seroka
+31631902531
dariusjs at gmail.com