[j-nsp] Multicast senders/receivers on the same PE (different VRF) with NG MVPN

[Krasimir Avramski]

Hi,

NG-MVPN extranets are supported since junos 9.5:

http://www.juniper.net/techpubs/en_US/junos11.4/topics/topic-map/mcast-mbgp-extranets.html#jd0e120

As I remember in some corner cases(only two extranet VRFs on the same
router - if my memory serves me right) there is NO need for tunnel hw (VT-
ifls)  -  only  "vrf-table-label" (lsi ifls) should do the trick.

Best Regards,
Krasi

On Thu, Nov 22, 2012 at 2:54 PM, Vladislav A. VASILEV <
vladislavavasilev at gmail.com> wrote:

> Hi all,
>
> I need to deliver multicast data to a receiver in a VRF, which resides on
> the same PE as the sender VRF.
>
> The only way I see this could be done is by putting one of the VRFs into a
> logical system and presenting the traffic over an lt interface. The problem
> is that this type of design does not scale. What if down the road I had
> another customer which wanted to receive multicast data from both the
> current sender/receiver? I'd then need to put it into another logical
> system (basically introducing another PE, being a logical one)?
>
> What options do I have?
>
> Thanks,
> Vladi
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>