[j-nsp] LAG on Ex4200 fiber + copper

[Riccardo S]

Tks
I'd like to buy them after I'm aware it works... ;-)

@Darius, if you are able to try pls share the results... ;-)

tks

Date: Thu, 29 Nov 2012 08:27:50 -0500
Subject: Re: [j-nsp] LAG on Ex4200 fiber + copper
From: james at freedomnet.co.nz
To: dim0sal at hotmail.com
CC: juniper-nsp at puck.nether.net

In theory it should be possible. The best thing todo is configure it and do a commit check and see what happens.


On Thu, Nov 29, 2012 at 3:07 AM, Riccardo S <dim0sal at hotmail.com> wrote:



Mates

any other experience in regards on the initial question ?



Tks



Date: Wed, 28 Nov 2012 11:00:59 +0100

Subject: Re: [j-nsp] LAG on Ex4200 fiber + copper

From: dariusjs at gmail.com

To: dim0sal at hotmail.com

CC: juniper-nsp at puck.nether.net



As far as I know and according to all Juniper docs you can only use optical pic ports and of course the dedicated vc port for this

eg.

https://www.juniper.net/techpubs//en_US/junos/topics/example/virtual-chassis-ex4200-link-aggregation-over-extended-vcps.html




Regards,Darius



On Wed, Nov 28, 2012 at 10:28 AM, Riccardo S <dim0sal at hotmail.com> wrote:















On ex-4200-24T



is it possible to create a LAG using a 1 Gb up-link fiber port + a 1 Gb copper



port ?











Any juniper.net



reference about that ?











Tks











_______________________________________________



juniper-nsp mailing list juniper-nsp at puck.nether.net



https://puck.nether.net/mailman/listinfo/juniper-nsp









_______________________________________________

juniper-nsp mailing list juniper-nsp at puck.nether.net

https://puck.nether.net/mailman/listinfo/juniper-nsp