[j-nsp] Error while validating a JunOS

[Ali Sumsam]

Thats the current version of this router.

JUNOS Base OS boot [11.4R1.14]
JUNOS Base OS Software Suite [11.4R1.14]
JUNOS Kernel Software Suite [11.4R1.14]
JUNOS Packet Forwarding Engine Support (MX80) [11.4R1.14]
JUNOS Online Documentation [11.4R1.14]
JUNOS Routing Software Suite [11.4R1.14]


*Ali Sumsam CCIE*
*Network Engineer - Level 3*
eintellego Pty Ltd
ali at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)410 603 531

facebook.com/eintellego
PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Fri, Nov 30, 2012 at 12:36 PM, Stacy W. Smith <stacy at acm.org> wrote:

> Can you share the current version and existing config? If it really is as
> simple as you say, then I would not expect a problem, but it would be
> interesting to investigate why it's complaining.
>
> --Stacy
>
> On Nov 29, 2012, at 6:33 PM, Ali Sumsam <ali+junipernsp at eintellego.net>
> wrote:
> > but that will kinda bypass it.
> > Should i worry about it or just ignore it?
> >
> > Regards,
> > *Ali Sumsam CCIE*
> > *Network Engineer - Level 3*
> > eintellego Pty Ltd
> > ali at eintellego.net ; www.eintellego.net
> >
> > Phone: 1300 753 383 ; Fax: (+612) 8572 9954
> >
> > Cell +61 (0)410 603 531
> >
> > facebook.com/eintellego
> > PO Box 7726, Baulkham Hills, NSW 1755 Australia
> >
> > The Experts Who The Experts Call
> > Juniper - Cisco – Brocade - IBM
> >
> >
> >
> > On Fri, Nov 30, 2012 at 12:30 PM, OBrien, Will <ObrienH at missouri.edu>
> wrote:
> >
> >> no-validate
> >>
> >> That is, request system software install no-validate blah
> >>
> >>
> >> On Nov 29, 2012, at 7:25 PM, Ali Sumsam wrote:
> >>
> >>> Hi,
> >>> I have a brand new MX5 router for one of my customers. The only
> >>> configuration I have on this router is
> >>>
> >>> 1, one login name and password
> >>> 2, IP address on FXP0
> >>> 3, telnet and ftp service.
> >>>
> >>> I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is
> >> the
> >>> recommended one for MX5 on juniper site.
> >>>
> >>>
> >>> When i try to validate this JunOS, it gives me following error.
> >>>
> >>> mgd: error: configuration check-out failed
> >>> Validation failed
> >>> WARNING: Current configuration not compatible with
> >>> /var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz
> >>>
> >>> Any suggestion. Can I just ignore this error and live with it?
> >>>
> >>> Regards,
> >>>
> >>>
> >>> *Ali Sumsam CCIE*
> >>> *Network Engineer - Level 3*
> >>> eintellego Pty Ltd
> >>> ali at eintellego.net ; www.eintellego.net
> >>>
> >>> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
> >>>
> >>> Cell +61 (0)410 603 531
> >>>
> >>> facebook.com/eintellego
> >>> PO Box 7726, Baulkham Hills, NSW 1755 Australia
> >>>
> >>> The Experts Who The Experts Call
> >>> Juniper - Cisco – Brocade - IBM
> >>> _______________________________________________
> >>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>
> >>
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>