[j-nsp] Trigger Trap when interface is overloaded
david.roy at orange.com
david.roy at orange.com
Tue Oct 2 09:53:26 EDT 2012
Hi all,
Is-there an easy way (without accounting-profile / event-script) to generate a trap or a syslog when interface reach 95% of load (for example) ? Platform MX / release 11.4
Many thanks
Best regards
David
David Roy
IP/MPLS Support engineer - Orange France
Ph. +33 2 99 87 64 72 - Mob. +33 6 85 52 22 13
david.roy at orange.com<mailto:david.roy at orange.com>
JNCIE-M&T/SP #703 - JNCIE-ENT #305 - JNCIP-SEC
_________________________________________________________________________________________________________________________
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
France Telecom - Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.
This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, France Telecom - Orange is not liable for messages that have been modified, changed or falsified.
Thank you.
More information about the juniper-nsp
mailing list