[j-nsp] Trigger Trap when interface is overloaded

david.roy at orange.com david.roy at orange.com
Tue Oct 2 10:51:52 EDT 2012


Thanks 

Yes I saw that but I'm not sure that this config is scalable and sometimes ifindex are not persistant after reboot. 

Best regards
David



 
David Roy 
IP/MPLS Support engineer - Orange France
Ph. +33 2 99 87 64 72 - Mob. +33 6 85 52 22 13
david.roy at orange.com
 
JNCIE-M&T/SP #703 - JNCIE-ENT #305 - JNCIP-SEC

-----Message d'origine-----
De : Per Granath [mailto:per.granath at gcc.com.cy] 
Envoyé : mardi 2 octobre 2012 16:30
À : ROY David DTF/DERX; juniper-nsp at puck.nether.net
Objet : RE: Trigger Trap when interface is overloaded

Have a look at RMON.


> Is-there an easy way (without accounting-profile / event-script) to 
> generate a trap or a syslog when interface reach 95% of load (for 
> example) ? Platform MX / release 11.4


_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
France Telecom - Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, France Telecom - Orange is not liable for messages that have been modified, changed or falsified.
Thank you.




More information about the juniper-nsp mailing list