[j-nsp] Interop ISIS Cisco

[Jeff Aitken]

On Wed, Oct 03, 2012 at 06:49:42PM +0800, EZ Joe wrote:
> We have problems with Juniper and cisco ISIS peering.
> 
> When we reboot cisco box, isis peering cannot establish until we activate and deactivate the interface.
> 
> Currently using 10.4 version. Any bugs that we need to watch out?

It would be helpful if you could share the configs from the devices on
either side of the link.  Are you using any form of authentication?
Graceful restart?  Do the MTUs match?  Have you captured any debug info,
and what log messages do you see?


--Jeff