[j-nsp] GRES on EX-Virtual chassis

[Luca Salvatore]

I always configure my VC-EX switches all with priority 255.
If they have different priorities you can't manually failover and as mentioned other weird stuff happens.

Luca


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Eugeniu Patrascu
Sent: Thursday, 4 October 2012 3:46 AM
To: Muruganandham M
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] GRES on EX-Virtual chassis

On Wed, Oct 3, 2012 at 8:51 AM, Muruganandham M <sedhuanand at gmail.com> wrote:
> Hello,
>
>        I am referring the following link.
>
> http://www.juniper.net/techpubs/en_US/junos10.3/topics/task/configurat
> ion/virtual-chassis-gres-cli.html
>
> Is it mandatory to configure the mastership-priority to 255 to enable 
> GRES on the VC ?

IIRC, when you have a two switch EX4200 VC, it's mandatory to set the priority manually to 255 on both members, otherwise weird stuff might happen. I run a pair like this and it's been stable for more than a year now.

Eugeniu
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp