[j-nsp] extra ISIS instance showing up...

[Bao Nguyen]

All,

I have what appeared to be two ISIS instances show up on the "show isis
database detail" except the second one ("00-01") doesn't have any TLV info
besides the subnets it's advertising for but the weird thing is this second
ISIS is never configured. Under the [protocol] there's only one ISIS
configure and there's no other routing-instances configured. Anyone have
any ideas?

LAB.00-00 Sequence: 0x3b4f, Checksum: 0xcf7, Lifetime: 710 secs
  Header: LSP ID: LAB.00-00, Length: 1444 bytes
    Allocated length: 1492 bytes, Router ID: 1.1.1.1
    Remaining lifetime: 710 secs, Level: 2, Interface: 0
    Estimated free bytes: 4, Actual free bytes: 48
    Aging timer expires in: 710 secs
    Protocols: IP, IPv6

  Packet: LSP ID: LAB.00-00, Length: 1444 bytes, Lifetime : 1198 secs
    Checksum: 0xcf7, Sequence: 0x3b4f, Attributes: 0x3 <L1 L2>
    NLPID: 0x83, Fixed length: 27 bytes, Version: 1, Sysid length: 0 bytes
    Packet type: 20, Packet version: 1, Max area: 0

  TLVs:
    Area address: 49 (1)
    Speaks: IP
    Speaks: IPV6

<clip>

LAB.00-01 Sequence: 0x750, Checksum: 0x22bd, Lifetime: 386 secs
   IP prefix: 10.0.2.0/26               Metric:       25 Internal Up

  Header: LSP ID: LAB.00-01, Length: 93 bytes
    Allocated length: 1492 bytes, Router ID: 0.0.0.0
    Remaining lifetime: 386 secs, Level: 2, Interface: 0
    Estimated free bytes: 1333, Actual free bytes: 1399
    Aging timer expires in: 386 secs

  Packet: LSP ID: LAB.00-01, Length: 93 bytes, Lifetime : 1198 secs
    Checksum: 0x22bd, Sequence: 0x750, Attributes: 0x3 <L1 L2>
    NLPID: 0x83, Fixed length: 27 bytes, Version: 1, Sysid length: 0 bytes
    Packet type: 20, Packet version: 1, Max area: 0

  TLVs:
    IP extended prefix: 10.0.2.0/26 metric 128 up
  No queued transmissions