[j-nsp] VPLS design - dual homed

[Jonathan Lassoff]

On Mon, Oct 29, 2012 at 8:03 PM, Luca Salvatore <Luca at ninefold.com> wrote:
> Right.  So BGP needs to be full meshed also for this to work right?

Yes -- assuming you're using BGP for signaling.

Since BGP is used to signal where the PE/edge ports are, once it comes
time to use that to establish LSPs, the routers just need to be able
to reach one another.
The same thing can be scaled out with route reflectors, if one needs.

--j