[j-nsp] LACP support on forwarding plane on M10i?
Martin T
m4rtntns at gmail.com
Tue Oct 30 11:15:49 EDT 2012
Is LACP supported on forwarding plane on M10i? According to "Disabling
Distributed Periodic Packet Management on the Packet Forwarding
Engine"(http://goo.gl/uDwYm) document LACP is supported on packet
forwarding engine only on MX series.
On the other hand, "show pfe statistics traffic" displays LACP under
"Packet Forwarding Engine local protocol statistics":
root at M10i> show pfe statistics traffic
Packet Forwarding Engine traffic statistics:
Input packets: 1581982432 1 pps
Output packets: 1330860944 0 pps
Packet Forwarding Engine local traffic statistics:
Local packets input : 13846116
Local packets output : 5817751
Software input control plane drops : 0
Software input high drops : 0
Software input medium drops : 6108913
Software input low drops : 0
Software output drops : 2049
Hardware input drops : 201244886
Packet Forwarding Engine local protocol statistics:
HDLC keepalives : 0
ATM OAM : 0
Frame Relay LMI : 0
PPP LCP/NCP : 0
OSPF hello : 0
OSPF3 hello : 0
RSVP hello : 0
LDP hello : 217
BFD : 3502848
IS-IS IIH : 140750
LACP : 564573
ARP : 40358
ETHER OAM : 0
Unknown : 0
Packet Forwarding Engine hardware discard statistics:
Timeout : 0
Truncated key : 0
Bits to test : 0
Data error : 0
Stack underflow : 0
Stack overflow : 0
Normal discard : 15337489
Extended discard : 0
Invalid interface : 0
Info cell drops : 0
Fabric drops : 0
Packet Forwarding Engine Input IPv4 Header Checksum Error and Output
MTU Error statistics:
Input Checksum : 707
Output MTU : 0
root at M10i>
regards,
martin
More information about the juniper-nsp
mailing list