[j-nsp] How reliable is EX multichassis? 3300 and 8200

[Morgan McLean]

I'll upgrade and try it out.

Sent from my iPhone

On Oct 30, 2012, at 6:33 PM, William McLendon <wimclend at gmail.com> wrote:

> NSR was not supported on EX3300s until 12.1 per the release notes, and 12.2 added NSSU for EX3300s.
> 
> I did not see mention of NSB in the release notes, but I have to believe it's supported for NSSU to work properly.  Unfortunately I do not have access to any EX3300s to test / confirm.
> 
> http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/ex-series-software-features-overview.html#high-availability-features-by-platform-table
> 
> also suggests that NSB came in 12.2
> 
> also make sure you remove the "no-split-detection" option if your VC is more than 2 units.
> 
> my testing with EX4500 / EX4200 VCs has been very positive of the NSR / NSB features on 11.4
> 
> Will
> 
> 
> On Oct 30, 2012, at 8:00 PM, juniper-nsp-request at puck.nether.net wrote:
> 
>> Date: Tue, 30 Oct 2012 17:00:17 -0700
>> From: Morgan McLean <wrx230 at gmail.com>
>> To: Ben Dale <bdale at comlinx.com.au>
>> Cc: juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] How reliable is EX multichassis? 3300 and 8200
>>    switches
>> Message-ID:
>>    <CAPiLEQdy1fMW5wG0qpY1ukn7tOvVP=pYTj0AXEzsgfSHXsiJgw at mail.gmail.com>
>> Content-Type: text/plain; charset=ISO-8859-1
>> 
>> Neither of these two options show up as a configurable flag:
>> 
>> set routing-options nonstop-routing
>> set ethernet-switching-options nonstop-bridging
>> 
>> I'm running 11.4R2.14 on the ex3300-48t switches.
>> 
>> Granted, right now the VC is broken so maybe it doesn't allow me to
>> configure it? I can head to the datacenter and upgrade these two devices to
>> recommended release and report back tomorrow as well.
>> 
>> Morgan
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp