[j-nsp] inline-jflow

[Doug Hanks]

Using fxp0 for inline-jflow has been disabled since 10.2; you need to use
a revenue port as the egress.


On 9/6/12 5:05 AM, "moki" <vomoki at gmail.com> wrote:

>Hello
>Does anyone know if inline-jflow support to send traffic via fxp
>interface.
>I tried to configure inline-jflow with the configuration bellow when the
>route to the destination is the fxp interface:
>family inet {
>                output {
>                    flow-server 88.88.88.1 {<-- routed via fxp
>                        port 2055;
>                        autonomous-system-type origin;
>                        version-ipfix {
>                            template {
>                                default-temp;
>                            }
>                        }
>                    }
>                    inline-jflow {
>                        source-address 88.88.88.2;
>                    }
>                }
>
>Is it possible ?
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp