[j-nsp] J2350 Basic IPv6 Configuration Issue

[waseem memon]

Hi,

It would be helpful, if you can share the interface configuration of both sides...



Thanks & Regards,WUM

 




 





> Date: Mon, 10 Sep 2012 19:51:43 +0800
> From: diogo.montagner at gmail.com
> To: jstuxuhu0816 at gmail.com; bdale at comlinx.com.au; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] J2350 Basic IPv6 Configuration Issue
> 
> Do you see DAD active in the show interface ?
> 
> On 9/10/12, Xu Hu <jstuxuhu0816 at gmail.com> wrote:
> > Actually I already configure the mode packet-based, also cannot work.
> >
> > Thanks and regards,
> > Xu Hu
> >
> > On 10 Sep, 2012, at 13:16, Ben Dale <bdale at comlinx.com.au> wrote:
> >
> >> Hi Xu,
> >>
> >> Do you have the box in packet or flow-mode?
> >>
> >> If it's in flow-mode, you'll need to configure:
> >>
> >> set security forwarding-options family inet6 mode flow;  (or packet-based
> >> depending on what you want)
> >>
> >> Cheers,
> >>
> >> Ben
> >>
> >> On 10/09/2012, at 2:34 PM, Xu Hu <jstuxuhu0816 at gmail.com> wrote:
> >>
> >>> Hi Experts,
> >>>
> >>> I have one J2350 box using below configuration, my question is that, why
> >>> it
> >>> cannot ping the other side?
> >>>
> >>> xuhu> show configuration interfaces ge-0/0/0.1824
> >>> vlan-id 1824;
> >>> family inet {
> >>>   address 10.254.125.138/30;
> >>> }
> >>> family inet6 {
> >>>   address fd00:0:1:1824:2420:1218:afe:7d8a/64;
> >>> }
> >>>
> >>> xuhu> show configuration security forwarding-options
> >>> family {
> >>>   inet6 {
> >>>       mode packet-based;
> >>>   }
> >>> }
> >>>
> >>> xuhu> ping inet6 fd00:0:1:1824:2420:1218:afe:7d89
> >>> PING6(56=40+8+8 bytes) :: --> fd00:0:1:1824:2420:1218:afe:7d89
> >>> ping: sendmsg: No route to host
> >>> ping6: wrote fd00:0:1:1824:2420:1218:afe:7d89 16 chars, ret=-1
> >>> ping: sendmsg: No route to host
> >>> ping6: wrote fd00:0:1:1824:2420:1218:afe:7d89 16 chars, ret=-1
> >>> ^C
> >>> --- fd00:0:1:1824:2420:1218:afe:7d89 ping6 statistics ---
> >>> 2 packets transmitted, 0 packets received, 100% packet loss
> >>>
> >>> xuhu> show ipv6 neighbors
> >>> IPv6 Address                 Linklayer Address  State       Exp Rtr
> >>> Secure
> >>> Interface
> >>> fe80::fa66:f2ff:fed2:ed00    f8:66:f2:d2:ed:00  stale       778 yes no
> >>> ge-0/0/0.1824
> >>>
> >>> Will appreciate for any comments.
> >>>
> >>> Thanks and Regards,
> >>> Hu Xu
> >>> _______________________________________________
> >>> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>>
> >>
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> -- 
> Sent from my mobile device
> 
> ./diogo -montagner
> JNCIE-SP 0x41A
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp