[j-nsp] SRX - multipoint st0 tunnel interface and static route

[pkc_mls]

Le 14/09/2012 2:55, Per Westerlund a écrit :
> The only way to handle this that I know of is FBF, in this case to implement source-based-routing. You have to pick a different tunnel depending on which source address you see.
>
> I don't have access to my systems right now so I can't send an example, but there are plenty of examples on either in Juniper KB or Juniper forums. The common use case is with 2 default routes to 2 different ISPs, and having to chose one or the other based on what local IP address is used.
>
> /Per Westerlund
>
>
Do you know if the static nat will work in such a scenario, because I 
have a lot of static nat rules configured
for traffic through this tunnel ?

It becomes complicated for a simple multi proxy ID configuration.