[j-nsp] OSPF cost : change traffic path

[Morgan McLean]

Could just add a metric to the interface you don't want passing traffic?
That should take into immediate effect..

Morgan

On Wed, Sep 19, 2012 at 10:46 AM, Rachid DHOU <rachid.dhou at gmail.com> wrote:

> Hello Experts,
>
> We have 4 routers : A,B,C and D.
>
> A and B are M7i
> C and D are M10i
>
> A connected to C , FE ==> Link 1
> B connected to D, FE ==> Link 2
>
> *OSPF and BFD* are runing in each link. but we made a high cost in link 2
> (same area). The goal is that link doesn't forwoard traffic.
>
> For your opinion what is the best way to switch traffic from link 1 to Link
> 2. (i mean best way : the small dowtime and easy operation )
>
> 1) In OSPF configuration Reduce cost on Link 2
> 2) Disable interface on Router A
>
>
> Don't forget BFD is runing on both links.
>
> Thanks for all your feedbacks.
>
>
> Kind regards,
> Rachid DHOU
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>