[j-nsp] Config help for basic MPLS setup

[Matthew Crocker]

Damn, so it looks like I'm stuck with ethernet-ccc on the SRX through the EX to the MX.   It'll work in my application but is not what I planned on doing.

-Matt

--
Matthew S. Crocker
President
Crocker Communications, Inc.
PO BOX 710
Greenfield, MA 01302-0710

E: matthew at crocker.com
P: (413) 746-2760
F: (413) 746-3704
W: http://www.crocker.com



On Sep 24, 2012, at 10:16 PM, Tim Jackson <jackson.tim at gmail.com> wrote:

> I'm pretty sure this is the case. EX4200 will not forward anything with > 1
> label.
> On Sep 24, 2012 8:40 PM, "Jeff Wheeler" <jsw at inconcepts.biz> wrote:
> 
>> On Mon, Sep 24, 2012 at 6:55 PM, Caillin Bathern <caillinb at commtelns.com>
>> wrote:
>>> On point 2 there, the ex can only process one label at a time but there
>> could be a larger label stack than that so it can be a P router.
>> 
>> I've been told the EX4200 will actually drop frames with more than one
>> MPLS label.  If you are able to get your proposed configuration
>> working, please post a follow-up.  I would like to know if it will
>> indeed function as a P box.
>> 
>> --
>> Jeff S Wheeler <jsw at inconcepts.biz>
>> Sr Network Operator  /  Innovative Network Concepts
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>