[j-nsp] out of the box

[Jed Laundry]

Hey,

On the SRX you can use a USB drive with autoinstall.conf:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB23882

On the other platforms you can do an automatic software install from USB,
not sure if you can wedge a different initial config file or if that would
make the validation fail... would be worth a try:

http://www.juniper.net/techpubs/en_US/junos10.4/topics/task/operational/junos-software-emergency-boot-disk-m-series-mx-series-t-series-tx-matrix-tx-matrix-plus-creating.html

Thanks,
Jed.

Sent from a small screen.